Best Exhaust System for Toyota Tacoma (Reviews-2022)

What is the best exhaust system for Toyota Tacoma at the moment? We know the correct answer and are ready to share it with you.

Borla 140680 Exhaust System is the best exhaust for Toyota Tacoma

Toyota Tacoma is one of the most powerful trucks on the market with exceptional horsepower and performance. However, it doesn’t always perform up to the mark, usually due to an inadequate exhaust system.

Exhaust systems have the power to enhance the torque and power of your truck and offer you smooth handling, better pickup, and increased power.

If you have heard that growl every time you put your foot on the accelerator, then it’s time to get a new exhaust for your Tacoma. That is a significant sign of something being wrong with the exhaust, which can be troublesome as a faulty exhaust can deteriorate your Tacoma’s engine performance by distorting airflow, which also affects fuel efficiency.

The air and gas buildup in the engine can be an issue if you do not have a good exhaust system. A good exhaust system tends to pull out air and gases from the engine and convert them into non-toxic substances not to harm the environment.

Other than this, poor exhaust systems can also cause your vehicle to produce a lot of noise that can disturb you and others around you. Again, getting the system repaired or replaced is your best bet.

Now, the question is, which exhaust system should you pick. Don’t worry; we have you covered.

We have prepared a list of the seven best exhaust systems for Toyota Tacoma for you. The exhausts we chose are the best of their kind and are meant to uplift your truck’s performance and life.

Top 7 Best Exhaust Systems for Toyota Tacoma:

ImageModelYearPrice
Borla 140680 Exhaust System is the best exhaust for Toyota TacomaBorla 140680 (Editor's Choice) Check Price
Flowmaster 817614 Exhaust SystemFlowmaster 817614 Check Price
MagnaFlow 19291 Performance Exhaust SystemMagnaFlow 192912016-18 Check Price
MBRP S5326AL Cat Back Exhaust SystemMBRP S5326AL2005-15 Check Price
Dynomax 39447 Stainless Steel Exhaust SystemDynomax 394472005-14 Check Price
MagnaFlow 17115 Large Stainless Steel Performance Exhaust System KitMagnaFlow 171152005-12 Check Price
MBRP S5338BLK 3" Cat Back Exhaust SystemMBRP S5338BLK2016-18 Check Price

Borla 140680 Exhaust System (Editor’s Choice)

Borla 140680 Exhaust System is the best exhaust for Toyota Tacoma

Optimizing for the perfect combination of system, gears, and premium steel, the entire system enables your automobile to collect and discharge poisonous gases through the cylinders.

Being a hardy and superior system, it also helps to bring down your car’s noise level for releasing the filtered exhaust gases from a suitable section away from the occupants. Essentially its created with exclusive care to ensure that the exhaust serves as an ideal communication channel between driver and automobile.

How your car’s exhaust system sounds go a long way in furnishing engine RPM’s acoustic response, thus allowing you to make crucial decisions. So, the type of sound-producing from the exhaust allows you to take advantage of a manual gear-changing mechanism, which entails the synchronous employment of accelerator pedals, clutch, and gear stick.

Essentially, the sound type outputted by your vehicle’s exhaust has a significant bearing on your gear-shifting technique for eventually facilitating an efficient and smooth transition between gears.

Since Borla has garnered extensive experience in manufacturing unique exhaust systems, they have achieved a high level of perfection in producing exhausts that let you handle rev-match shifting effectively.

Engineers at Borla have made the most of state-of-the-art sound analysis equipment and all-embracing digital modeling to develop a well-tuned system for a fantastic driving experience.

Pros

  • Exhaust system termed as Cat-Back S-Type fits Toyota Tacoma 3.5L (2016-2021)
  • T-304 austenitic stainless-steel tip layered comes polished in chrome
  • Special multi-core along with straight-through technology releases latent HP
  • Enhanced velocity generates extra driving power, boosts engine economy, and offers Borla®’ Sound of Power’ for proper rev-match shifting
  • Precise computer-moderated CNC fabrication for a perfect fit
  • Super-smooth mandrel bends for maximizing flow and power

Cons

  • Tailpipe setup can be a pain in the neck

Check Current Prices

Flowmaster 817614 Exhaust System

Flowmaster 817614 Exhaust System

Serving as a top-quality upgrade for your pickup, it boosts your pickup’s output. The feature that makes it replace the original exhaust without the need for any modification is something that makes it a favorite.

Additionally, it features all the essential hardware and accessories, rendering and replacing the pre-installed exhaust a breeze. Thunder Cat-Back system is constructed using 409S stainless steel for extended functional life, while the 2.5” mandrel-bent component links the catalytic converter with the fish-ribbed inlet pipe.

Thereafter this Flowmaster exhaust extends backward into a Super 50™ silencer with two 2.50-inch tailpipes extending out on either side of the vehicle, at the back of the rear wheels.

The exhaust guarantees the delivery of heightened torque and horsepower and a restrained sound output outside and inside the pickup. It, by and large, entails the installation of broader tailpipes with fewer abrupt bends, which aid in backpressure reduction. Naturally, the greater your ability to decrease backpressure, the better efficiency will be.

Pros

  • Engineered to work as a drop-in replacement
  •  Crafted using 409S stainless steel for long-term durability
  • Dyno tuned for optimal performance
  • It comes with all required hardware, components, and guidelines for a simple DIY bolt-on mounting
  • Reinforced with Delta Flow Technology
  • Makes use of factory hanger locations
  • Clears the extra factory tire
  • Limited lifetime warranty

Cons

  • Many car owners and drivers have reported that after installing the exhaust, it was an ordeal as the included brackets didn’t hold on to the tailpipes firmly.

Check Current Prices

MagnaFlow 19291 Performance Exhaust System

MagnaFlow 19291 Performance Exhaust System

If you’re looking for an exhaust system that can improve performance and fuel economy, then Magnaflow 19291 is the right choice. They enhance your engine’s horsepower and torque, which can make your engine run faster and better.

Install this on your Tacoma can also reduce the noise level to a great degree. Moreover, they are also very durable and last for a lifetime.

Features

409 Stainless Steel: This exhaust comprises 409 stainless steel, making it corrosion-resistant, extremely durable, and controlling the temperature. Unlike other steels such as 304, which several companies use to manufacture exhausts, this one won’t heat up or discolor at extreme temperatures or on a muddy road.

Enhances Horsepower And Torque: Consider exhaust systems as breathing pipes for your vehicle. The better they breathe, the better they work. Magnaflow exhaust system allows good airflow and makes sure no air is trapped in the engine. This continuous flow of air and gases significantly improves torque and horsepower.

Improves Sound Quality: The exhaust system’s mufflers reduce noise and allow you to have a peaceful device. In addition, the system reduces pressure buildup, and the exhaust produces smooth sounds when you hit the gas.

Catalytic Converters: Converts toxic substances found in the air and gas into non-toxic.

Pros

  • Mandrel-bent tubing for smooth airflow.
  • Boosts power.
  • Reduces noise level.
  • Easy to install.
  • Catalytic converters included.

Cons

  • More expensive than other similar products.

Check Current Prices

MBRP S5326AL Cat-Back Exhaust System

MBRP S5326AL Cat Back Exhaust System

MBRP S5326AL is a good option, especially if durability is enormous importance to you. It is completely coated with aluminum and has silica on the seams to prevent rust.

All in all, it is perfect for increasing power and improving sound.

Features

16 Gauge T304 Stainless Steel Pipes: This type of steel blends chromium and nickel, which resists corrosion and rust. That makes it highly durable and resistant to rain and muddy roads.

Improves Mileage: This exhaust has wider pipes (2.500 in), allowing gas to pass quickly. That is a significant problem with most exhausts on the market, so the wider pipes often consider this exhaust’s USP.

Silicon Welded Seams: The seams at the end of the pipes are welded with silicon so that no rust accumulates on them.

Pros

  • Mounts from OEM hangers.
  • 3-year warranty.
  • Installs easily
  • Boosts horsepower and torque.
  • Improve exhaust sounds.
  • 3-1/2” stainless steel exhaust tip

Cons

  • No catalytic converter.

Check Current Prices

Genuine Toyota Parts PT910-89061 TRD Cat-Back Exhaust

Genuine Toyota Parts PT910-89061 TRD Cat-Back Exhaust

The Toyota Cat-back exhaust takes your Tacoma’s performance level up a notch by suppressing growling noise, increasing power, and offering fantastic durability.

Features

Deep Throaty Tone: If your Tacoma makes gruesome and harsh noise when you hit the accelerator, then Toyota’s cat-back exhaust is the remedy. It produces about 95 decibels of noise, which is well under legal limits.

Corrosion Resistance: The exhaust has stainless steel all over it, protecting it from corrosion. That makes it a long-lasting product.

TRD Lego Etched Tip: It’s a special exhaust tip that suppresses pressure by allowing a less restrictive gas path. This technique also improves horsepower and allows the engine to work well.

Pros

  • Significantly lightweight – 29 pounds.
  • Produces an excellent rumble sound.
  • Improved airflow.
  • Stainless steel body.

Cons

  • The pipe produces a pungent smell, which eventually disappears.

Flowmaster 17432 Cat-back System

Flowmaster 17432 Cat-back System

This exhaust system reduces noise and gives you a smooth drive. Moreover, it also uplifts your truck’s performance by increasing horsepower and is among some of the most durable products out there.

Features

16 Gauge Mandrel Bends: The faster an exhaust empties air from the engine, the better will be the performance, and this is what this exhaust does, thanks to the now-famous bending technology that allows gas and air to exit quickly.

Dyno Tuned: This helps adjust fuel mixture and is an excellent fit for trucks used to carry heavy loads. It improves mileage and helps reduce fuel consumption. Plus, it also reduces poisons found in gases.

Improves Sound Quality: Flowmaster is fantastic when it comes to making your Tacoma sound better. It offers good throttle response, good airflow, and a super 50 series muffler to ensure that the truck produces moderate sounds.

Pros

  • Good throttle response.
  • Comes with hangers and hardware for easy installation.
  • Aluminized steel finish for extra durability.
  • 2.5” tubing for better airflow.

Cons

  • Very heavy at 59 pounds.

Dynomax 39447 Stainless Steel Exhaust System

Dynomax 39447 Stainless Steel Exhaust System

Dynomax 39447 is for drivers who want their trucks to have better horsepower. It can take the horsepower to 2000 HP and allow the vehicle to work faster and pick more loads. Other than that, it works on CRF technology and absorbs interior resonance.

Features

Stainless Steel: The body of this exhaust is made up of 409 stainless steel, which is great for controlling high temperatures and being durable. It is also corrosion-resistant and is meant to run for many years without any issues.

Unrestricted Airflow: The exhaust is a side exit, and the pipes have a diameter of 2.5”, making it easier for the gases to come out of the engine. That reduces back pressure and engine choking. Thus, a smooth airflow is guaranteed with this exhaust system.

CRF Technology: The exhaust works on CRF technology which reduces noise. It is also found in many racing cars to suppress noise. Installing this exhaust on your Tacoma will reduce noise levels by 4 decibels. It also improves mileage by providing 2000 SCFM (Standard Cubic Feet Per Minute).

Pros

  • Extra durable with 100$ welded design.
  • Extremely lightweight with 34 pounds.
  • 90-day performance and sound guarantee.
  • It has a limited lifetime warranty.
  • Eliminates cylinder reduction drone.
  • Ultra-flow muffler to boost performance.
  • Cooling tip with band clamp.

Cons

  • It might get loud in hilly areas.

Check Current Prices

MagnaFlow 17115 Large Stainless Steel Performance Exhaust System Kit

MagnaFlow 17115 Large Stainless Steel Performance Exhaust System Kit

This exhaust system is a combination of durability and performance. It takes your vehicle’s performance to newer levels and reduces sound to a great deal.

Features

Top-Notch Muffler: This stainless steel muffler provides a smooth and practical pathway for escaping gases. It is an exhaust system’s essential quality because it reduces back pressure and offers great pickup and horsepower.

Durable Body: No matter how good an exhaust system is, everyday wear and tear and extreme temperatures can shorten its life. Magnaflow 17115 has a 100% stainless steel body that can handle harsh temperature conditions without heating up. It is also corrosion-proof and doesn’t discolor with time. Overall, it’s one of the most durable exhausts you can get for your Tacoma.

Mandrel Bent Tubing: The bent tubing offers smooth airflow and avoids engine choking.

Pros

  • Extremely lightweight (24 pounds).
  • 409 stainless steel makes it a durable exhaust.
  • Lifetime warranty.
  • Bolt-on easy installation.

Cons

  • A bit louder.

Check Current Prices

MBRP S5338BLK 3” Cat-Back Exhaust System

MBRP S5338BLK 3" Cat Back Exhaust System

This exhaust system enhances the exhaust flow and withstands harsh temperatures. It can also improve mileage and save fuel, making it the right choice for reducing fuel consumption.

Features

3” Mandrel Bent Tubing: Bent tubings allow the exhaust pipes to exit out the gas and air quickly without letting it stay in one place and choke other parts.

Black Coat Finish: The exhaust pipes come with a black coat finish for extra durability. They can handle unfavorable temperature conditions as the coating protects the pipes from severe heat.

Hassle-Free Installation: The exhaust is very easy to install as it’s a bolt-on installation.

Muffler: There’s a muffler in the exhaust, restricting it from producing loud sounds.

Pros

  • Rustproof.
  • Stylish with a black coat finish.
  • Extremely durable.
  • Cons
  • Very heavy at 55 pounds.

Check Current Prices

How To Pick The Best Exhaust System For Toyota Tacoma

With so many exhaust systems on the market, picking one cannot be obvious. While we have prepared a list of the seven best exhaust systems for Toyota Tacoma, it is still crucial for you to know what makes a difference in an exhaust system.

Here are a few factors to keep in mind:

Long-Lasting

Exhaust systems are not cheap, which is why your priority should be to pick one that’s exceptionally durable. Look for exhaust systems that are 100% steel and rust and corrosion-proof.

Ultra Flo Muffler

Mufflers in exhaust systems make it easier for gases and air to exit the vehicle. As a result, they prevent engine choking and bad startups. Make sure the exhaust you choose has a good muffler.

Catalytic Converter

Only a few exhaust systems will have this feature. It converts poisonous and harmful gases into non-toxic gases. This kind of exhaust system will ensure a better environment by reducing pollution.

Less Noise

What good is an exhaust if it is too loud? Look for exhausts that work under 95 decibels (the standard noise limit as per the law).

So, What’s the Best Exhaust System for Toyota Tacoma?

According to us, Magnaflow 19291 is the best exhaust system for Toyota Tacoma because it is manufactured with 409 stainless steel, enhances power, produces less noise, and converts toxic gas into non-toxic.

However, it changes from person to person, so make sure to pick one according to your own needs.