The 5 Best PEX Crimp Tools – Crimping Reviews (2026)

Are you looking for the best PEX crimp tools? The right choice starts with the connection system: copper crimp rings and stainless steel pinch clamps need different tools.

IWISS® F1807 PEX Pipe Crimping Tool Kit - one of the best PEX Crimp Tools

These five PEX crimping tools cover useful combinations of size range, access and storage. The comparison includes both copper-ring crimpers and stainless-clamp cinchers, with their strengths and limitations explained below.

Top Five Best PEX Crimp Tools

SharkBite 23251 PEX Crimp Tool

SharkBite 23251 PEX Crimp Tool

The SharkBite 23251 keeps copper-ring work simple by putting two common sizes in one tool. Its fixed ½-inch and ¾-inch crimping cavities avoid the need to swap inserts every time the pipe size changes. That makes it a sensible choice for a project built around those two sizes rather than a collection of rarely used dies.

Features

This is a copper crimp-ring tool, not a stainless-clamp cincher or an expansion tool. The long handles provide leverage, while the two-size head keeps the setup straightforward. A separate go/no-go gauge checks the finished crimp; the tool does not inspect the connection automatically.

The trade-off is reach. Both the head and the handles need room around the fitting, and there is no ⅜-inch or 1-inch capacity here. SharkBite also calls for regular calibration checks. Choose the 23251 for straightforward two-size copper-ring work, not for a claim that it needs no adjustment or inspection.

Pros

  • Two fixed cavities cover ½-inch and ¾-inch copper rings
  • No die changes between its two supported sizes
  • Long handles provide useful leverage

Cons

  • Does not cover ⅜-inch or 1-inch rings
  • Needs handle clearance and routine calibration checks
Check Price at Amazon

IWISS IWS-KG1096 PEX Cinch Tool

IWISS IWS-KG1096 PEX Cinch Tool

The IWISS IWS-KG1096 takes a different approach: it pinches the raised ear on a stainless steel PEX clamp instead of compressing a copper ring around its full circumference. One head covers compatible ⅜-inch, ½-inch, ⅝-inch, ¾-inch and 1-inch clamps, so there are no size-specific inserts to keep changing.

Features

The ratcheting action holds the tool through the closing cycle and releases when the clamp ear has been pinched. Access to that ear can be more convenient than getting a full-ring crimper around a fitting, although the handles still need working space. The supplied calibration gauge is useful for checking the jaw gap as the tool is used.

This is a good option for a stainless-clamp system spanning several tubing sizes. Its limitation is the connection method: it does not crimp copper rings, and the manufacturer excludes Zurn Qickclamp rings. It is also a fastening tool, not a combined clamp remover; removal calls for a separate suitable tool.

Pros

  • One head covers five listed stainless-clamp sizes
  • Ratcheting mechanism with a completion release
  • Calibration gauge supplied

Cons

  • Not for copper crimp rings or Zurn Qickclamp
  • No integrated clamp-removal function
Check Price at Amazon

IWISS IWS-FA PEX Crimp Tool Kit (Editor’s Choice)

IWISS IWS-FA PEX Crimp Tool Kit

The IWISS IWS-FA kit remains the overall pick for its useful spread of copper-ring sizes and organized storage. It covers ⅜-inch, ½-inch, ¾-inch and 1-inch work, making it more flexible than the two-size tools when a project includes several branch and supply sizes.

Features

A built-in 1-inch jaw accepts smaller interchangeable inserts for the other three sizes. The cutter and go/no-go gauge round out the essentials, and the fitted case gives the dies a proper home. The gauge is particularly valuable: it checks whether the finished copper ring falls within the required dimensional limits instead of leaving the result to appearance alone.

The extra versatility comes with a small interruption whenever a different insert is needed. There are also more loose pieces to manage than with a fixed-head tool. For mixed-size copper-ring installations, that is a worthwhile compromise; for repeated ½-inch and ¾-inch work, a fixed dual-size head may be quicker.

Pros

  • Four supported copper-ring sizes from ⅜ inch to 1 inch
  • Cutter, inspection gauge and fitted storage case
  • Interchangeable inserts broaden one tool’s usefulness

Cons

  • Changing sizes requires changing inserts
  • More components to keep organized than a fixed-head tool
Check Price at Amazon

Apollo 69PTKG1096 Pinch Clamp Tool

Apollo 69PTKG1096 Pinch Clamp Tool

The Apollo 69PTKG1096 is a focused stainless-clamp tool with a ratcheting action and automatic release at the end of the closing cycle. It is a practical alternative to a copper-ring crimper when the installation uses compatible pinch clamps and access to the clamp ear is easier than access around the whole ring.

Features

Apollo’s current specification lists ⅜-inch, ½-inch and ¾-inch sizes for this model. Its calibration bar and gauge provide a way to check jaw spacing, rather than relying on a vague promise of permanent factory accuracy. The manufacturer’s instructions also call for inspection and pressure testing of the completed system.

The narrower stated size coverage is the main reason to choose the IWISS cincher instead if 1-inch work is essential. Within Apollo’s listed range, the appeal is a straightforward mechanism and documented calibration procedure. It is not a copper-ring tool, and Zurn Qickclamp rings are specifically excluded.

Pros

  • Ratcheting action with an end-of-cycle release
  • Covers Apollo’s listed ⅜-inch, ½-inch and ¾-inch clamps
  • Calibration bar and gauge support routine checks

Cons

  • Current model specification does not include 1-inch capacity
  • Not for copper rings or Zurn Qickclamp
Check Price at Amazon

IWISS 1/2-Inch & 3/4-Inch Combo Crimp Tool

IWISS 1/2-Inch & 3/4-Inch Combo Crimp Tool

The IWISS combo tool suits the plumber who repeatedly alternates between ½-inch and ¾-inch copper rings. Both cavities are built into its angled head, so changing between those sizes does not involve removing a die. That is its main advantage over the four-size kit.

Features

The angled head can make it easier to approach a fitting between joists or beside an obstruction, provided there is still enough room to close the handles. The complete set adds a tubing cutter, go/no-go gauge, starter copper rings and a case. Together, those accessories make it a coherent two-size setup rather than just a bare crimper.

This is not a four-jaw interchangeable kit. It does not cover ⅜-inch or 1-inch rings, and the angled head cannot overcome every confined-space problem. Choose it for repeated work in its two supported sizes; choose the IWS-FA when the wider size range matters more than avoiding die changes.

Pros

  • Fixed ½-inch and ¾-inch cavities avoid insert changes
  • Angled head helps with access around obstructions
  • Complete set includes cutter, gauge, starter rings and case

Cons

  • No ⅜-inch or 1-inch copper-ring capacity
  • Still needs clearance for the head and handles
Check Price at Amazon

What to Consider Before Buying a PEX Crimping Tool

Start with the tubing, fitting and connection components specified for the installation. A tool that closes comfortably is only useful if it matches the complete system.

The Length of the Tool

Long handles provide leverage but need room to open and close. Shorter or angled tools may improve access near joists and cabinets, though they still require clearance around the fitting. Handle length does not determine the pipe sizes a tool supports.

Supported Pipe Sizes and Connection Types

Check the nominal tubing sizes and the ring or clamp method separately. A dual-size ½-inch and ¾-inch copper-ring tool does not cover every size between them, and a stainless-clamp cincher does not replace it. Copper-ring crimping, stainless-clamp cinching and expansion connections use different tooling.

GO/NO-GO Gauge

For copper crimp rings, the correct gauge checks the dimensions of the finished crimp. The ring must satisfy the gauge manufacturer’s GO and NO-GO criteria. A clamp tool’s jaw-calibration gauge serves a different purpose; neither check replaces the system’s required inspection and pressure test.

Ease of Use

A fixed dual-size head reduces insert changes, while interchangeable dies broaden the size range. Ratcheting cinchers can be convenient when the clamp ear is accessible. Think about the fittings you will actually reach, rather than choosing by the largest number of accessories.

Calibration

Factory adjustment is a starting point, not a lifetime accuracy guarantee. Follow the exact tool’s checking and adjustment instructions. Keep the jaws clean and inspect suspect crimps before continuing; a poor result is not fixed by assuming that the tool is still calibrated.

Price

Compare the complete setup: tool, correct rings or clamps, cutter, inspection gauge and any missing accessories. Paying more only makes sense when it buys a useful size range, better access or equipment the project actually needs. For another precision-tool comparison, see the guide to torque tools.

Verdict: What’s the Best PEX Crimp?

The IWISS IWS-FA is the overall choice for copper-ring work across four common sizes, with its cutter, inspection gauge and organized case. The SharkBite and IWISS combo tools are simpler choices for repeated ½-inch and ¾-inch work, while the IWISS cincher and Apollo serve compatible stainless-clamp systems.

The best PEX tool kit is the one that matches the connection method and provides access to the actual fittings. Choose the system first, then the tool that makes that work practical.