The 10 Best Rims for Acura Integra (Reviews-2026)

The best rims for an Acura Integra should suit the car’s light, precise character as well as its appearance. A clean silver design, a period-style mesh or a darker split-spoke wheel can each work well. The crucial starting point is identifying which Integra the wheels are for.

rpf1 15

Ordinary US-market 1986–2001 Integras use 4×100 wheels; the 1997–2001 Type R uses 5×114.3. The revived 2023-onward non-Type S Integra also uses 5×114.3, while the Type S has a different 5×120 setup and is not covered by these choices. The RPF1 and ENKEI92 below are four-lug options for the classic cars. The remaining models are five-lug choices, with their intended applications explained in each review. None is a universal fit for every Integra.

The Top 10 Best Rims for Acura Integra — Comparison Table

OE Wheels AC04

OE Wheels AC04

The AC04 is the restrained silver option. Five shaped spokes and a clean painted finish give it a factory-inspired appearance, making it easier to pair with an understated Integra than the red- or blue-accented wheels farther down the list. Its appeal is a tidy road-car look rather than an overtly competition-focused design.

The selected AC04-17080-5450-45S measures 17×8 with a +45 mm offset, 5×114.3 drilling and a 64.1 mm bore. OE Wheels identifies it as an Acura TL-style aftermarket replica and supplies a center cap. It is a five-lug choice, not a replacement for the four-lug wheels on an ordinary classic Integra.

The 8-inch width offers a broader stance, but it also makes tire choice and inner and outer clearance important, particularly on a classic Type R. Compare the complete dimensions with the existing wheels and brakes before mounting tires. The straightforward silver face is easier to keep visually clean than a dense mesh pattern.

Pros

  • Factory-inspired five-spoke design in gloss silver.
  • 17×8, +45 mm specification with a 64.1 mm bore.
  • Center cap included.

Cons

  • Five-lug applications only.
  • 8-inch width needs an approved tire and adequate clearance.
Check Price at Amazon

Enkei RPF1 (Editor’s Choice)

rpf1 15

The RPF1 is the strongest starting point for a classic four-lug Integra. Its twin-spoke design looks purposeful without overwhelming the car, and the silver finish works with both standard-looking and more focused builds. The compact 15-inch size also preserves the period character better than a much larger wheel.

This 3795704935SP is 15×7 with a +35 mm offset, 4×100 mounting and a 73 mm bore. Enkei lists an estimated weight of 9.85 lb for this exact silver version. Its MAT construction combines casting with rim forming, and Enkei specifies Spec-E inspection. The low published weight is a concrete distinction, rather than a promise that a wheel alone will transform handling.

The offset places it farther outward than a same-width +40 or +45 mm wheel, so lowered cars and wider tires still need a clearance check. Correct centering and compatible lug hardware are also required. Center caps are optional rather than included. It earns the overall choice for its modest diameter, low published estimated weight and clear four-lug application.

Pros

  • Estimated 9.85 lb weight for the selected 15×7 silver version.
  • MAT construction and Spec-E inspection.
  • Twin-spoke design suits the classic Integra’s proportions.

Cons

  • +35 mm offset needs attention on lowered or wider-tire setups.
  • Center caps and compatible installation hardware are separate considerations.
Check Price at Amazon

Motegi Racing MR107 D5S

Motegi Racing MR107

The MR107 uses a bold five-spoke face with bright machined surfaces against gloss-black recesses. Small perimeter details give it a more decorative appearance than the RPF1, while the 16-inch diameter keeps the design from looking excessively large on a classic car.

The selected MR10767012345 is 16×7 with a +45 mm offset and 5×114.3 mounting. The manufacturer’s specification distinguishes it from similar-looking 5×100 and 5×108 versions. It is a five-lug option for a suitable classic Type R setup, rather than the ordinary four-lug Integra.

The 7-inch width is relatively restrained, but the spoke shape and inner barrel still need to clear the brakes. Its machined highlights show cosmetic marks more readily than a plain painted face, and the small outer details take additional cleaning. Choose it for a more conspicuous finish without moving to an 18-inch wheel.

Pros

  • Gloss-black and machined five-spoke design.
  • 16×7, +45 mm version with 5×114.3 mounting.
  • More restrained diameter than the 18-inch alternatives.

Cons

  • Five-lug Type R application rather than ordinary four-lug models.
  • Machined details need cosmetic care.
Check Price at Amazon

Motegi Racing MR127 CS10

Motegi Racing MR127

The CS10 takes a cleaner approach than the MR107. Ten slender spokes and satin black create a more technical appearance, with no bright lip or colored inserts to compete with the car’s paint. It is the more natural visual match for a modern Integra in this group.

The MR12788012738 measures 18×8 with a +38 mm offset and 5×114.3 drilling. Motegi’s current specification confirms that exact size and finish. The 18-inch diameter is more in keeping with the revived non-Type S Integra than a classic car originally supplied with much smaller wheels.

The +38 mm offset positions the wheel farther outward than many factory-style setups, so check tire-to-fender clearance, especially on lowered suspension. A satin-black finish makes brake dust less conspicuous but still needs regular gentle cleaning. This is a style-led five-lug option; it does not fit the Type S’s 5×120 hubs.

Pros

  • Clean ten-spoke design in satin black.
  • Current manufacturer-listed 18×8, +38 mm specification.
  • No bright lip or colored accents.

Cons

  • Outward stance needs a tire and clearance check.
  • Not for four-lug classics or the 5×120 Type S.
Check Price at Amazon

Konig Illusion

Konig Illusion

The Illusion uses color more subtly than a fully painted blue wheel. Ball-cut edges highlight its ten spokes, with a blue-tinted clearcoat against gloss black. The result changes with the light, adding detail without covering the entire face in a bright finish.

The selected IL7751440F is 17×7 with a +40 mm offset and 5×114.3 mounting. Konig describes a tuner-inspired ten-spoke design and explains that the tinted accents can look different under different lighting. Its modest 17-inch diameter keeps the colored details prominent without requiring an oversized rim.

The 7-inch width is relatively modest, but the blue accent is a definite styling commitment. It works best when it complements the body color or a small number of matching details. As with the other five-lug choices, confirm the exact application and brake clearance rather than assuming every Integra shares the same hubs.

Pros

  • Ball-cut spoke edges with blue-tinted clearcoat.
  • 17×7, +40 mm five-lug specification.
  • Gloss-black background keeps the accents relatively subtle.

Cons

  • Blue tint changes appearance with the lighting.
  • Accent finish will not suit every paint color or build.
Check Price at Amazon

American Racing AR105

American Racing AR105

The AR105 brings a rounded five-spoke design to a comparison dominated by narrower spokes. Anthracite centers contrast with a machined lip, creating a more traditional custom-wheel appearance. It is an appealing alternative when the angular patterns of the MR127 or GW8 feel too busy.

This AR105M77566A is 17×7.5 with a +45 mm offset and 5×114.3 drilling. The selected version is anthracite with a machined lip, not the larger black-finished AR105 variants sold under similar names. Its mid-width specification sits between the 7-inch and 8-inch options here.

The bright outer lip gives the wheel much of its character, but it also makes curb marks more obvious. Allow enough spoke and barrel clearance for the brakes, and match the tire to the 7.5-inch rim. It is a five-lug styling choice, not a four-lug conversion or a guarantee of improved performance.

Pros

  • Rounded five-spoke face in anthracite.
  • Machined lip adds contrast without a fully chrome finish.
  • 17×7.5, +45 mm five-lug specification.

Cons

  • Machined lip makes cosmetic damage more visible.
  • Requires compatible tires, centering and lug hardware.
Check Price at Amazon

Enkei ENKEI92

enkei92 15

The ENKEI92 is the period-style alternative to the RPF1. A dense mesh center and machined lip give it an unmistakably older import-tuning character, which pairs naturally with the compact lines of a classic Integra. Silver keeps the design bright without the stronger color statement of the gold version.

The selected 465-570-4938SP measures 15×7 with a +38 mm offset, 4×100 drilling and a 72.6 mm bore. Enkei lists it in the Classic Series with Spec-E inspection. This is the four-lug silver version; similar ENKEI92 wheels also exist with different drilling, widths and offsets.

The mesh has more small surfaces to clean than the RPF1’s open spokes, and the machined lip benefits from careful washing. Its 15-inch diameter keeps a classic appearance, while the 7-inch width still calls for an approved tire and a proper clearance check. Choose it for period styling rather than assuming it shares the RPF1’s construction or published weight.

Pros

  • Classic mesh design with a machined lip.
  • 15×7, +38 mm version uses 4×100 mounting.
  • Enkei specifies Spec-E inspection.

Cons

  • Dense mesh takes more time to clean.
  • Not the same MAT design or weight specification as the RPF1.
Check Price at Amazon

Enkei GW8

Enkei GW8

The GW8 is the bolder black-and-red choice. Its slotted split-spoke pattern uses red accents to break up the dark face, giving it a more overtly customized appearance than a plain satin-black wheel. It suits a build where those accents have a deliberate relationship with the rest of the car.

The selected 4487700242BK is 17×7 with a +42 mm offset and dual 5×100/5×114.3 drilling. The relevant mounting pattern for the five-lug Integra applications here is 5×114.3. Use the 5×114.3 mounting holes with the correct lug hardware; the extra pattern does not make it fit a four-lug hub.

The 7-inch width is restrained, but the multiple spoke surfaces take more time to wash than a simple five-spoke face. Red trim can also become visually busy if several unrelated accent colors are already present. Choose the GW8 for its distinctive appearance while matching tire width, lug hardware and brake clearance to the exact car.

Pros

  • Black split-spoke face with red accents.
  • 17×7, +42 mm specification.
  • Dual drilling includes 5×114.3.

Cons

  • Busy spoke pattern takes additional cleaning.
  • Red accents need to suit the rest of the build.
Check Price at Amazon

Touren TR60 3260

Touren TR60 3260

The TR60 emphasizes contrast. Bright machined spoke faces sit against black pockets and an outer black ring, making the wheel design easy to see even from a distance. It is more intricate than the AR105 without relying on a colored accent.

The selected 3260-7714B measures 17×7.5 with a +42 mm offset, a 72.62 mm bore and dual 5×108/5×114.3 drilling. The manufacturer’s matrix lists a 1,600 lb wheel load rating for this version. The Integra application uses the 5×114.3 holes; it is not a four-lug wheel.

The sculpted face gives the design depth, though it also introduces more edges to clean. Its 7.5-inch width offers a middle ground between the narrower and wider options, with tire approval and brake clearance still determining the complete fit. The wheel’s load rating should be compared with the car’s requirements rather than treated as a handling claim.

Pros

  • Machined face contrasts with black pockets and ring.
  • 17×7.5, +42 mm specification.
  • Manufacturer matrix confirms dual 5×108/5×114.3 drilling.

Cons

  • Intricate face needs more cleaning.
  • Machined surfaces make cosmetic marks more noticeable.
Check Price at Amazon

Drifz 207B FX

Drifz 207B FX

The 207B FX combines a dark multi-spoke face with a narrow red ring at the outer edge. The ring creates a clear boundary between wheel and tire, making the design more visible than an entirely black wheel without introducing a large bright surface.

The selected 207B-6701842 is 16×7 with a +42 mm offset and 5×114.3 drilling. Drifz describes the finish as carbon black with a red racing stripe. Its compact diameter is a more restrained visual change for a suitable five-lug classic Type R than an 18-inch design.

The thin red edge is the main styling attraction and also the area most exposed to cosmetic curb damage. The 16-inch barrel and spoke shape need to clear the exact brakes before tires are mounted. It is a relatively compact five-lug option, with a more decorative finish than the RPF1 or ENKEI92.

Pros

  • Carbon-black finish with a narrow red outer stripe.
  • 16×7, +42 mm specification.
  • Five-lug 5×114.3 mounting.

Cons

  • Red outer stripe is vulnerable to visible curb marks.
  • Five-lug application and brake clearance need attention.
Check Price at Amazon

Frequently Asked Questions About the Best Rims for an Integra

What Are the Wheel Specifications on the Acura Integra?

Identify the year, market and trim before comparing wheels. The four-lug classic Integra, the classic Type R, the revived non-Type S car and the modern Type S do not share one universal mounting specification. A hub conversion or brake upgrade changes the starting point again.

Integra Bolt Pattern Ordinary US 1986–2001: 4×100; US 1997–2001 Type R: 5×114.3. 2023-onward non-Type S: 5×114.3; Type S: 5×120.
Stock wheel offset Depends on generation, trim and original wheel. Check the exact factory specification or wheel marking.
Stock Rim Sizes Range Classic non-Type R and Type R sizes differ; modern cars use larger factory wheels. Match the exact year and trim.
Custom Offset Range No universal safe range. Compare width, offset, brakes, tires, suspension and fender clearance together.
Custom rim sizes range Select an approved tire/rim combination that preserves suitable overall diameter, load rating and clearance.

Bolt pattern describes the number of lugs and the diameter of their circle. Offset is the distance between the wheel’s centerline and mounting face. Width and offset work together: changing either can reduce suspension clearance or move the tire toward the fender. A matching bolt pattern is necessary but does not establish a complete fit.

What Is the Best Offset for an Integra?

There is no single best number for every generation and wheel width. Start with the original dimensions, then compare the proposed wheel’s inner and outer positions. Check the complete tire-and-wheel assembly at steering lock and through suspension travel, especially on lowered cars.

A low-offset wheel may look more aggressive but can introduce rubbing or require bodywork. Choose compatible lug-seat hardware, suitable centering and a wheel load rating that meets the vehicle’s requirements. Test-fit before mounting tires.

What Is the Biggest Wheel and Tire That Can Be Used?

Outside tire diameter is only one part of the decision. The tire must be approved for the wheel width, meet the car’s load and speed requirements and clear the brakes, suspension and body. A larger wheel generally leaves less sidewall when outside diameter remains similar.

Modest 15- or 16-inch designs can suit a classic Integra, while the revived model was designed around larger factory wheels. Brake upgrades can rule out smaller diameters. Do not use a single “maximum size” as permission to fit any wheel within that diameter.

Can Integra Wheels Fit a Toyota?

Sometimes, but brand names and lug count alone are insufficient. Compare the exact bolt pattern, bore, width, offset, load rating, lug-seat type and brake clearance on both cars. Four lugs do not make 4×100 and 4×114.3 interchangeable, and two five-lug wheels can differ just as much.

Conclusion: The Best Rims for an Integra

The RPF1 is the overall pick for a classic four-lug Integra, combining a compact 15-inch diameter with a low published estimated weight and an open twin-spoke design. The ENKEI92 is the period-style mesh alternative. For suitable five-lug applications, the AC04 keeps the appearance understated, the MR127 suits a more modern black-wheel look, and the Illusion, GW8 and Drifz add deliberate color accents.

Choose the correct application first, then the design. The best-looking wheel is useful only when its complete specification works with the car, tires and brakes.