Looking for the best lift kit for the Dodge Ram 2500? Start with the truck’s year, engine and drivetrain, then decide whether the goal is a more level stance, extra suspension height or a body lift.
These four lift kits for Dodge Ram 2500 cover different jobs and applications. The spacer kit is the simplest approach to front leveling; the two Rough Country systems add suspension height for specified diesel 4WD trucks. Performance Accessories takes a different route with a body lift for a much narrower gasoline 2WD application.
For levelling a 2016 F-150 rather than lifting a Ram 2500, see Leveling Kit for 2016 F-150; the vehicle and intended suspension change are different.
Top 4 Best Lift Kits for Dodge Ram 2500
Supreme Suspensions 2.5-Inch Front Leveling Kit
The Supreme Suspensions 2.5-inch kit is the straightforward choice when the front of an otherwise suitable truck sits lower than desired. Its steel spring spacers raise the front while retaining the existing coil springs, making it a more focused modification than replacing the suspension with a taller complete system.
The manufacturer’s application for this version includes 1994–2013 Ram 2500 4WD trucks. The appeal is the small number of main components: a pair of coated steel spacers rather than new springs, rear blocks and a set of shocks. That makes it worth considering when front leveling is the actual goal.
The limitation is equally clear: spacers do not refresh worn springs or dampers, and a level stance does not increase payload capacity. Installation still involves safely unloading the coil springs and checking alignment and suspension travel. Choose it for a restrained change in stance, not for a promise of dramatically better ride quality.
Pros
- Front leveling while retaining the existing coil springs
- Coated steel spacer construction
- Simpler scope than a full front-and-rear suspension lift
Cons
- Does not replace tired springs or shocks
- Requires proper coil-spring handling and post-installation checks
Performance Accessories 60123 Body Lift Kit
The Performance Accessories 60123 is the body-lift option in this comparison. It raises the cab and bed relative to the frame, creating a taller body position without using taller suspension springs. That can suit a build focused on body clearance rather than changing the suspension’s basic layout.
Its application is specific: the manufacturer’s instructions list the Ram 2500 version for 2005 gasoline-engine 2WD trucks. Reinforced nylon body blocks, associated hardware and steering-shaft extension components address the extra separation between the body and chassis. It is not a universal kit for every Ram 2500.
The trade-off is the work around the body lift itself, including bumper alignment and attention to lines and controls. It does not raise the axles or differential, and the relocated rear bumper must not be used as a towing point. Choose this approach only when its exact application and body-lift method suit the project.
Pros
- Raises the body without taller suspension springs
- Reinforced nylon lift blocks and associated hardware
- A distinct alternative to front leveling
Cons
- Ram 2500 application is limited to specified 2005 gasoline 2WD trucks
- Body, bumper and control connections require substantial attention
Rough Country 343.20 3-Inch Suspension Lift Kit
The Rough Country 343.20 is the more moderate suspension-lift choice for a 2003–2013 Ram 2500 diesel 4WD. Instead of adding front spacers alone, it uses replacement front coil springs and rear lift blocks, with shocks matched to the intended setup.
The system combines a 3-inch front lift with 1-inch rear blocks and N3 shocks. That unequal lift helps reduce the factory nose-down stance rather than simply raising both ends by the same amount, while the replacement springs give the front lift a different approach from the spacer-only kit.
This is a useful middle ground when leveling spacers are too limited but a 5-inch system is more than the build needs. The diesel-specific springs are not a recommendation for a gasoline truck, and larger tires still require a careful clearance check. Expect a suspension installation and alignment, not an accessory that can simply be bolted on without checking the rest of the truck.
Pros
- Replacement front springs rather than spacer-only leveling
- 3-inch front and 1-inch rear lift arrangement
- Matched shocks included in the specified system
Cons
- Diesel 4WD application; not a universal Ram 2500 kit
- Tire clearance depends on wheel dimensions and the truck
Rough Country 392.23 5-Inch Suspension Lift Kit (Editor’s Choice)
The Rough Country 392.23 remains the overall pick for a more substantial suspension build on a compatible 2003–2007 Ram 2500 diesel 4WD. Its strength is the wider set of supporting components: this is a 5-inch system designed around the geometry changes that accompany a taller lift.
Lifted front coils, rear blocks and N3 shocks are supported by control-arm drop brackets, a track-bar bracket and steering-related hardware. Those parts address arm angles and axle positioning, which makes this a more coherent approach than trying to reach the same height with spacers alone.
The larger lift also demands more from the installation and the finished truck. The manufacturer notes possible driveline vibration on two-piece-driveshaft applications, while tire and wheel selection still affects clearance. It is the strongest choice here for the right taller build, but the 343.20 is more sensible when its smaller lift already meets the goal.
Pros
- Supporting brackets address geometry changes at the taller lift height
- Front springs, rear blocks and shocks form a coordinated system
- Suitable focus for a substantial diesel 4WD build
Cons
- Limited to the specified 2003–2007 diesel 4WD application
- Greater installation scope and possible driveline adjustments
How to Pick the Best Lift Kit for the Dodge Ram 2500
Choose by application first and lift height second. A kit for a diesel 4WD truck may use springs or brackets that are wrong for a gasoline or 2WD version, even when the model name and year look similar.
Amount of Lift
Start with the smallest change that achieves the intended stance and clearance. A taller lift changes more of the truck’s geometry and access height. It does not automatically provide better traction or more useful suspension travel.
Type of Lift Kit
Front spacers mainly address stance. A suspension system can combine springs, blocks, shocks and corrective brackets. A body lift raises the body relative to the frame. None of these, by itself, increases the truck’s rated payload or towing capacity, and a body lift does not add clearance beneath the differential.
Budget
Allow for installation, alignment and any wheel, tire or driveline work the chosen setup needs. A simpler kit can be the better purchase when it meets the goal without adding unnecessary changes.
Installation
Use the exact kit’s instructions and a qualified installer where the work exceeds the available tools or experience. Check steering and brake-line clearance through the required movement, complete the alignment and follow the manufacturer’s fastener recheck schedule. Do not improvise with straps to compress loaded springs.
Legality
Check applicable vehicle-height and equipment requirements before choosing the finished setup. Tire coverage, bumper position and headlight adjustment can matter alongside the suspension itself.
Brand
A useful kit has clear application information, installation documentation and support for the specified components. A familiar name does not remove the need to match the part number to the truck. Avoid mixing lift components unless the manufacturer explicitly supports the combination.
So, What’s the Best Lift Kit for Dodge Ram 2500?
The Rough Country 392.23 is the overall choice for a compatible 2003–2007 diesel 4WD truck needing a substantial lift. The 343.20 offers a more moderate suspension change, while the Supreme Suspensions kit keeps the focus on front leveling. The Performance Accessories 60123 serves a different, narrowly specified gasoline 2WD body-lift application.
Choose the system that fits the truck and the intended use, rather than treating the largest lift as the automatic winner for every Ram 2500.
If the truck uses a 5.9 Cummins, see the separate exhaust guide to Exhaust for 5.9 Cummins; a suspension-kit listing does not establish exhaust fitment.



